• The new DMA 4200 M is a density meter for exceptional conditions. It measures the density at temperatures between -10 °C and 200 °C and elevated pressures up to 500 bar. The Pulsed Excitation Method used by DMA 4200 M delivers the most stable density results based on comprehensive knowledge of the oscillation characteristics. The new automatic bubble detection, FillingCheck™, makes the DMA 4200 M compliant with ASTM D4052 and ASTM D5002. Viscosity influence is eliminated by a fast new viscosity correction, ensuring density results with an accuracy of up to 0.0002 g/cm3. The new Temperfect™ feature of DMA 4200 M allows immediate density measurements at any temperature between 0 °C and 150 °C at ambient pressure.
  DMA 4200 M improves, accelerates, and simplifies density measurement of heavy petroleum samples.

Incorporated keeping in mind the dire needs and demands of our professionals; we have been richly engrossed in the delivery of a suited collection of Water Flow Meter.

Product details:

• Durable
• Reliable life
• Capable assortment
• Well tested
• Economical price
• Efficient

Owing to our sound experience, we have been successful in catering to the requirements of our esteemed clients by offering quality Water Flow Meter. These offered turbo meters are widely used to measure the total flow of water passing through pipelines. Owing to the features like excellent result accuracy, high immunity against abrasive and low loss of head, these meters are widely appreciated in the market.

Other Details:

• A wide selection of sealed, magnetically coupled registers, adaptable to TS and QG technologies, as well as different electrical output versions, single or multiple, are available
• Tungsten carbide impeller shaft tips 8. bearings for negligible wear in flea, duty use are standard
• Registers are stainless steel/glass encapsulated and guaranteed against fogging

DEWAG make Oil Content Meter (OCM) is an integral part of all oily water separator (OWS) systems. The OCM continuously monitors how much oil is in the water that is pumped out the discharge line of the OWS system. The OCM will not allow the oil concentration of the exiting water to be above the Marpol standard of 15 ppm. The oil content meter will sound an alarm if the liquid leaving the system has an unsatisfactory amount of oil in the mixture. If it is still above that standard, then the bilge water will be reentered into the system until it meets the required criteria. The OCM uses light beams to determine how oily the water in the system is.

• 450(H) X 350(W) X 325(D) mm
• Enclosure - Wall mounting type
• Electrical connections - On base plate

• Range: 0 – 30 ppm
• Accuracy - Within IMCO limits
• Alarm Indication 1 - Instant LED: Settable (0 to 99ppm), Factory set to 15 ppm
• Alarm Relay 1 & Indication 2 - Delayed LED & Relay: Delay time settable (0 to 99 secs.), factory set to 15 secs.
• Alarm Relay 2 - Buzzer relay: Energises with Relay 1 and de-energises when Acknowledge push button is pressed
• Alarm Relay 1 contacts - Changeover 1: For Overboard(O/B) and Recirculation(R/C) valve operations, rated 5Amps. @ 230V AC - Changeover 2: For O/B and R/C valve status indications, potential free
• Alarm Relay 2 contacts - Changeover 1: For external buzzer operation, reated 5Amps. @ 230V AC
• Concentration readout - By 7-segment Red LED display on front panel
• Light source - Low power IR LED
• Supply - 230V AC, 1Ph., 50Hz, 20VA

• Series OCM-01 Model: 01