Testing Meter

Product Details:

The GM640 can be used to measure the moisture and temperature of different grains. It is applicable to allocating, Purchasing, storing and processing packaged grains. With this Tester, the moisture and temperature of the grains can be rapidly and exactly measured.

• Grain moisture test
• Food temperature test
• Grain moisture standard setting and excessive moisture tip
• Backlight control function
• Celsius, Fahrenheit temperature unit conversion
• Battery hold function
• Auto power off function: 5 minutes without any operation automatic shutdown
• Data hold function

Application:
Used for fast and accurate measurement of moisture and temperature in the process of Allotment, acquisition, storage, machining of packed grains, feedstuff, powder.

Product Details:

Digital micro-ohm-meter, capable of measuring low resistance with 1micro-ohm resolution. Itemploys the proven 4-wire (4W) measurement where fixed DC current is supplied to DUT and voltage drop across the DUT ismeasured and displayed as proportional resistance reading. The meter is able to deliver guaranteed stable readings on inductiveas well as resistive loads.

General Specifications:Display: Large seven segment LED display. 4 ½ digit display. Max. display in digit 19999. Display update rate : 2.5 times / secondIndications: LEDs for range and W / mW indications. LED indication for operation and pulse mode. Over range indication: Blinking zero display. Under Range Indication : All Display shows zero.(Not blinking)

Product Details:

Chlorophyll meter can measure chlorophyll content of plants. Chlorophyll content and leaf nitrogen have a very close relationship, thus, chlorophyll content can reflect plants demand for nitrogen. Using the instrument can do good to put fertilizer reasonably, improve utilization of nitrogen and protect the environment.

The patented MC-100 directly measures and displays chlorophyll concentration from intact leaf samples without damaging the plant material. The meter is calibrated to measure chlorophyll concentration with units of µmol of chlorophyll per m². For reference and comparison purposes the meter also outputs relative units (CCI or SPAD). Typical application include chlorophyll concentration determination in leaves for assessment of nutrient status, fertilizer requirements, evaluation of stress, and optimization of harvest.

Product Details:

It is a fast ,accurate method to derive direct moisture % in a sample by Loss on Heating Method. Heating arrangement consists of a 250 watt heating lamp with a solid state power stat to control rate of drying and also temperature

Product SpecificationBrandKyoto Electronics Manufacturing Co.,Ltd.ApplicationIndustrialTemperature Range40 Degree CelsiusHydrometerDigitalMeasuring Range2.0000 g/cm3ColorGrey and whiteModel NumberDA130NPack TypeCarton BoxesSamplingSyringe type hand pumpData storage1,100 samplesExternal outputIrDA for Personal computerMinimum Order Quantity1Product DescriptionOverview:
Portable density meter / Specific gravity meter model DA130N is a microprocessor-controlled system with an LCD display. It is manufactured by KEM, Japan. It works based on the ASTM approved ‘oscillation of the U-tube’ method. The light weight and easy-to-operate system weighs just 360 grams.
It can be used to analyze viscous liquids up to 2000 mPa*s. There is also a port through which the samples can be injected into the U-tube by means of a syringe.
The densitymeters are mostly used in labs to analyze volatile liquid samples. One of the main applications of densitymeters is the maintenance of batteries. This is done by testing the density of acids in the batteries. Some commercially available models of densitymeters are built in such a way that the U-tube is in the same casing as the electronics.
The volatility of samples and acids has always meant that the life of the portable densitymeter is always short. But, the DA130N has a simple and ingenious design where the electronics are housed far away from the U-tube. This means that the volatility of the samples and the fumes of the acidsnever harm the electronics.
Features:
• Displays: Density - Specific gravity - Temperature compensated density - Specific gravity - Percentage of Brix - Alcohol concentration - Sulfuric acid concentration - API degree - Baume degree - Plato degree - Degrees proof• Graphic LCD displays: Temperature - Sample number - Auto-sensing oscillation stability - Auto data saving - Auto data output - Data deletion - Battery capacity indicator• Can be operatedusing either right or left hand and the cell can be viewed during measurement.• Light weight makes it easy to operate.• Viscous liquids up to 2000 mPa*s can be measured.• Life of the battery is twice that of conventional makes, which provides much longer operation time.• Sampling volume and speed is single-hand controlled.
Specification:
Range - Density: 0.0000 to 2.0000 g/cm3Precision: ±0.001 g/cm3Resolution: 0.0001 g/cm3Temperature range: 0 to 40°CDisplay content: Density, temperature compensated density, specific gravity, temperature compensated specific gravity, Brix %, alcohol concentration, sulfuric acid concentration, API degree, Baume degree, Plato and Proof degree, etc.Temperature compensation: 10 kinds of coefficients per sample plus temperature to be corrected can be entered.Auto calibration: Can store density of water at various degrees of temperature required for calibration of the measuring cell.Sampling: By syringe type hand pump.Data storage: 1,100 samplesExternal output: IrDA for Personal computer
Applications:
Industries: Beverages | Foods | Petroleum | Chemical products | Pharmaceuticals | Alcoholic beverages | Battery acids

Product SpecificationModel Name/Number S1 TITAN / TRACERBrand BRUKERMachine Type Handheld XRF AnalyserUsage/Application QA/QC and positive material identification (PMI) in fabrication PMI for plant / refinery safety ScraWarranty 1 yearDetector Type Alloy Metal detectorWeight 1.5 kgMinimum Order Quantity 1 PieceProduct DescriptionS1 TITAN 500 (32 Elements) with 1 year warranty : Ti,  V,  Cr,  Mn,  Fe,  Co,  Ni,  Cu,  Zn,  As,  Se,  Zr,  Nb, Mo,  Ru,  Rh,  Pd,  Ag,  Cd,  In,  Sn,  Sb,  Hf,  Ta,  W,  Re, Ir,  Pt,  Au,  Pb,  Bi, Bruker advantage compared to others:Light WeightContinuous analysis in Field without Detector cooling or any other problem.Better Beam PathSmart Library1 year warrantyMore than 8 Hours individual battery life for a single full chargeDetector Shield to protect the detector from getting damaged, in case of detector physical damage Bruker will replace the detector free of cost.Fundamental and Empirical calibration inbuiltCustomize calibration can be done at sight without the help of PCMore than 1000 new grads can be adder based on customer specialized grade without the help of PC or any other softwarePen Drive and USB Cable for data transferDirect company in India for both Sales and service which makes better service than any others.Service Center Located at Delhi, Mumbai, Chennai.Spare and consumable available in Local currency in India for future serviceBruker is having more Expertise in X-Ray machine due to wide product line in X-Ray field24 hours Hot line support

Product Details:

The SciAps X-50, most competitive portable X-Ray Fluorescence (XRF) analyzer, uses the proven, reliable and competitive technology of PiN diode detectors. For many applications such as basic sorting of stainless steel, refractories and copper alloys, or analyzing heavy metals in soils, ores, powders, gold, precious metals, etc., the PiN technology is perfectly suited. The X-50 allow to measure all the needed elements for currents applications. The X-50 presents a very attractive price for routine applications.
The X-50 includes the same advanced X-ray tube as other X models (operating at 40 kV max.), integrated camera, video, and the Android OS platform. The X-50 is available for alloy, environmental, mining/exploration, industrial and user-customizable applications. Analyzers may be factory calibrated with fundamental parameters, Compton Normalization (EPA Method 6200), or user defined empirical calibrations.


Product SpecificationBrand SciapsModel Name/Number X-50Weight 1.50 Kg with batteryBattery Life Up to 8-10 hoursPower 6-40kVDimensions 7.25" x 10.5" x 4.5"Temp. Range 10 Deg F to 130 Deg F at 25% duty cycle.

Product Details:

Specifically designed for the quick and accurate measurement of fluoride ions in drinking water and other aqueous samples, the ExStik FL700 incorporates a sensing electrode, measuring electronics, and display in one convenient package, making this unit ideal for field or laboratory testing. The FL700 is capable of direct reading of total fluoride from 9.99 ppm or mg/L down to 0.1ppm, and the meter provides automatic temperature compensation (±10 degrees C of calibration temperature). Complete with electrode, TISAB reagent tablets, sensor cap, four 3V button batteries, and 48" (1.2m) neck strap.

The FL705 is an easy to clean, rugged ExStik Replacement Fluoride Electrode Module. For use with Extech Model FL700 Fluoride Meter. Measures fluoride and temperature and features ATC via built-in Pt-100-Ohm sensor.

 

Features:

• First Fluoride meter with built-in Automatic
• Temperature Compensation
• Fastest response Fluoride meter (<1min)
• Easy use for Field or Laboratory fluoride testing
• Small sample/TISAB volume required for testing (10mL)
• In compliance with EPA Method 340.2.( Potentiometric Ion
• Selective Electrode)
• Automatic electronic 1 or 2 point calibration
• with offset adjustment
• Memory stores 25 labeled readings
• Waterproof to IP57
• Large LCD simultaneously displays ppm of Fluoride,
• Temperature, and analog bargraph indicator
• Complete with electrode, TISAB reagent tablets, sensor
• cap, four 3V button batteries, and 48" (1.2m) neckstrap
• Contact Extech or your local lab supply for Fluoride calibration standards

 

Product Details:

This is for estimating the bearing capacity of shallow foundations in situ and for the design of flexible pavement. In the test procedure a steel plate is subjected to gradually increasing load and settlements of the plates recorded.

• 50 tonne hydraulic jack with separate pumping unit fixed to it a 0 - 500KN x 0.5KN. : 1No.
• Pressure gauge and flexible metal pipe 5 mtr. long : 1No.
• Special ball and socket arrangement between the jack and the bearing plate : 1 No.
• Extension rod 12mm dia x 25 cm long for taking dial gauge readings : 16 Nos.
• Magnetic base with female thread on top for holding extension rod : 4 Nos.
• Top end plate, 50mm, dia with male thread for fitting onto the extension rods and positioning the dial gauge plunger : 4 Nos.
• Column 15cm dia x 25cm long with flanges complete with four bolts and nuts : 2 Nos.
• Column 15cm dia x 50cm long with flanges complete with four bolts and nuts : 1 No.
• Bridge support of welded steel angle construction, 5 mtr. Span and stands approximately 30 cm. High. Fitted with two quick release clamps a for positioning and holding the dial bracket : 2  Nos.

 

Specification:

• Plane M.S. plate 60cms x 60cm .
• Square x 60 cms. Square x 25mm thick.
• Plane M.S. plate 45cm x 45cm x square x 25mm thick.
• Plane M.S. plate 30 cms x 30 cms x 25mm
• thick. Dial Gauge 0.01mm x 25mm - 4 Nos.

Accessories:

• Plane M.S. 75mm x 25mm thick
• Plane M.S. 50cm x 25mm thick
• Grooved M.S. plate 60cms x 60cms x 25mm thick
• Grooved M.S. plate 45cms x 45cms x 25mm thick
• Grooved M.S. plate 30cms x 30cms x 25mm thick
• Grooved M.S. plate 75cms x 75cms x 25mm thick

Note :

• When plates of size more than 30cm sq, are used, in order to prevent deflection of the edge, a series of smaller plates are advised to be placed concentrically on the bottom plate.
• Flexible rubber pipe 1 mtr. length can be supplied for the hydraulic jack in place of metal pipe at extra cost. For site testing load trusses to meet the reaction of loading are available in different capacities as under. 81

Product Details:

Consists of a study handle under. Which is fixed a sensitive proving ring. An extension piece is fixed to the bottom of the proving ring and carries a detachable penetration cone at its tip. Proving ring capacity 100 kg (1kn) and 0.002mm dial gauge provided indicates the penetration load applied. An optical viewer is provided to facilitate reading the dial gauge by the operator. Simplified for single person operation. A calibration chart is provided for the proving ring. Instrument is complete in a wooden carrying case.

Additional Information:

• Production Capacity: 30
• Delivery Time: exstock
• Packaging Details: wooden