hardness testers

Product SpecificationIndication accuracy 0.001Maximum drive stroke 17.5mm-0.7inchModel no TR200PLUSData Storage 100 groupsColour BlueSize 158mmX63.5mmX46mmRelative humidity 90%Brand PreciseMinimum Order Quantity 1

Product Details:

 Our products are high in demand due to their premium quality and affordable prices. Furthermore, we ensure to timely deliver these products to our clients, through this we have gained a huge clients base in the market.

Product Details:

Its use for measurement of tablet hardness.To measure, the safety cover is to be opened; the sample placed in the measuring station and is pressed against a metal plate (connected to an electronic load-cell) moved by a hand wheel, until the sample brakes.  The result of the measurement is shown on the built-in-LCD in either N, kN, kgf or lbf.

Product Details:

We are successfully meeting the varied requirements of our clients by providing the best quality range of RCCB Tester Lutron

Product Details:

The Impulse 7000DP Defibrillator/Transcutaneous Pacemaker Analyzer ensures proper operation and ultimate performance of critical life-support cardiac-resuscitation equipment. The Impulse 7000DP is superior in compliance, technology, efficiency and ease of use. A sleek and rugged exterior is paired with first-class technology, putting this defib tester in a league of its own. Standardize test procedures, capture, and print results with Ansur test-automation software, or use the Impulse 7010 Defibrillator Selectable Load Accessory to ensure IEC 60601-2-4 and AAMI DF80 compliance.

Key Features:

• Impulse 7010 Defibrillator Selectable Load Accessory provides multiple loads of 25 Ω, 50 Ω, 75 Ω, 100 Ω, 125 Ω, 150 Ω, 175 Ω, and 200 Ω to comply with IEC 60601-2-4 standard (optional)
• Lown, Edmark, trapezoidal, biphasic and pulsed-biphasic defibrillation technology compatibility
• AED compatibility
• 12-lead ECG simulation
• Ability to test external transcutaneous pacemakers (Impulse 7000 DP only)
• Internal pacer brand selections
• Flexible heart-rate settings (1BPM step)
• DSP-based measurements for firmware and waveform upgrade
• Waveform capture, store and replay
• First-in-class accuracy ± 1% of reading + 0.1J
• Long lasting, rechargeable battery

The Impulse 7000DP model is a combination Defibrillator/Transcutaneous Pacemaker Analyzer:
The Impulse 7000DP defibrillator AED analyzer ensures proper operation and ultimate performance of critical life-support cardiac-resuscitation equipment, including mono- and bi-phasic defibrillators and AEDs. This best-in-class defibrillator analyzer offers test capabilities that encompass a global spectrum of established pulse shapes, feature breakthrough AED technology compatibility, and deliver superior performance with accuracy readings ± 1% of reading +0.1J. The Impulse 7000DP model is a combination Defibrillator/Transcutaneous Pacemaker Analyzer with an intuitive user interface, backlight, and easy-to-read display. This portable, rugged, easy-to-carry device features functionality that includes energy output measurement, ECG waves, and an extensive range of test loads and measurement algorithms needed to test external transcutaneous pacemakers. The Impulse 7000DP coupled with the Impulse 7010 Defibrillator Selectable Load Accessory enables end-users to select from multiple loads (25 - 200 Ohm) ensuring IEC 60601-2-4 compliance. The Impulse 7000DP features 10 independent ECG outputs that provide 12 lead combinations for standardized clinical signals. Ansur test automation may be purchased in order to standardize test procedures, capture waveforms and test results, and evolve with increasing requirements for electronic data storage.

Portable Hardness TesterProminent & Leading Manufacturer from Navi Mumbai, we offer portable leeb hardness tester (hl10) and uci hardness tester.

Product Details:

The B.I.M.S virtually eliminates operator influenceIt is found that measuring Brinell indentations can result in measurement errors betweenoperators. This B.I.M.S. can virtually eliminate operator influence on test result.

Just place and click! Operating B.I.M.S is easyWith this handy instrument entire test sequence is simple. Place the CCD camera tube on thework piece and press button on tube or click 'Auto' in toolbar on computer screen. The B.I.M.S.automatically measures the diameter of indentation with resolution of 0.01mm and display Brinellhardness value with diameter. All data storage functions are automatically performed according tobatch parameters.

The B.I.M.S. can be configured to meet your needsAn unlimited number of batches can be created each with its own test parameters andcertificates. The operator can select test load and indentor size, party name, address, certificateno. date, batch no. and description, high and low limits for readings etc. The previous batchescan be reopened for viewing and address change etc.The software reports include readings, statistical data, frequency distribution and variation graphsand certificate. The export to Excel option is provided and generates Microsoft excel file.The systems includes calibration and check facilities to calibrate scale and for checking ofcalibration. This eliminates any systems error in measurement.

Mobile measurement system - use anywhereThe unit is USB powered. As you plug in USB video capture, power is sourced by USB port andno other power supply is required. This makes it ideal for measurement with laptop.
Additional Information