New Items

Crack Measuring Microscope (HSN 9011)

Crack Width Measuring Microscope is used for precision measurement of crack width. It is also used for Inspection and quality control in Engineering, Electronics Textile, CPT, Printing, metallurgy. It is equipped with a dual reticle graduated in millimeters. With focusable eyepiece* option, a turn of the eyepiece brings the reticle into sharp focus and the objects can be focused sharply with the help of rack-pinion focusing knobs. The eyepiece reticle can also be rotated through 360° to align it with the job. An adjustable LED illuminator operated on battery is also provided. The base has opening at the bottom for object manipulation

Product Details:

The OPSA-150 is a new organic pollutant monitor that uses HORIBA's proprietary Rotary Cell Length Modulation, a measuring technique incorporating 25 years of expertise.
The unit can be used as an organic pollutant monitor at drainage systems for determining compliance with COD monitoring regulations, for monitoring quality of water measuring levels of organic matter at water supply intakes, and as an organic monitor on process lines (phenol meter).

*Pole mount, outdoor cover, and analysis panel are available as options.

Name

 

Organic Pollutant Monitor

 

Model name

 

OPSA-150

 

Measurement items

 

UV absorbance, VIS absorbance, Converted COD level, Converted TURB level

 

Principle

 

2 light path 2 wavelength cell length modulation

 

Measurement wavelength

 

UV: 253.7 nm, VIS: 546.1 nm

 

Construction of analysis section

 

Rotary type

 

Range (Equivalent to a cell length of 10 mm)

 

UV absorbance / VIS absorbance

0 to 0.1 Abs - 0 to 5.0 Abs (Can be set 0.1 Abs increments)

 

Resolution

 

0.0001 Abs (Can be set to 0.001 Abs)

 

Repeatability

 

Within ±2% of full scale (within ±5% if full scale is 2.6 to 5.0 Abs)

 

Linearity

 

Within ±2% of full scale (within ±5% if full scale is 2.6 to 5.0 Abs)

 

Stability

 

Within ±2% of full scale in 24 hours (within ±4% in 24 hours if full scale is 2.6 to 5.0 Abs)

 

Response time

 

T 90 within 1 minute (flow rate of 5 L/min)

 

Cleaning method (cleaning cycle)

 

Automatic cleaning via wipers (continuous cleaning)

 

Display methods

 

 

 

LCD display: 320 x 240 monochrome crystal display with backlight (touch panel type)

Display details: UV absorbance, VIS absorbance, UV-VIS absorbance (Absorbance can be changed to absorption constant (SAC: m-1), Converted COD level, Converted turbidity level

 

Calibration method

 

Solution calibration (calibration solution inserted in ampule) via zero solution, span solution (single touch calibration)

 

Sample conditions

 

Temperature

 

2 to 40°C*

 

Sample flow rate

 

Minimum 2 L/min, Maximum 20 L/min

 

*Use a heating device to prevent sample freezing.

 

Ambient conditions

 

Ambient temperature: 0 to 40°C, Ambient humidity: 85% or less

 

Analog output

 

No. of outputs

 

3 outputs (standard)

 

Type

Up to 3 can be chosen from UV absorbance, VIS absorbance, UV-VIS absorbance, Converted COD level, and Converted TURB level outputs

 

Specification

DC 4 - 20 mA, or DC 0 - 16 mA, isolated output (no isolation between each channel), maximum resistance load: 600Ω

 

Alarm and status outputs

 

 

 

No. of outputs

6 outputs (standard)

 

Type

Up to 4 can be chosen from power failure, maintenance (standard and fixed), batch alarm, COD maximum limit alarm, TURB limit alarm (standard), light source error, sample failure, cleaning motor error, and analyzer error outputs

 

 

Product Details:

Automation solutions must be compact, scalable and flexible. S7-1200 CPUs are available as standard and failsafe versions. They are scalable in terms of their performance and are equipped with integrated IOs, integrated PROFINET interface for programming, HMI connections, distributed IOs and distributed drive architectures. The S7-1200 can be optimally adapted to your individual requirements by means of pluggable signal modules and communication modules.

Additional Information:

• Delivery Time: exstock
• Packaging Details: sea worthy / air worthy / wooden

Dear Sir / Madam 

Welcome to ALFA ENGINEERING SOLUTIONS ( www.alfaenggsolutions.com )  !!!

 

We are thankful for your interest shown in our Company Profile and Products

 

ALFA-LABTECH is a division of ALFA ENGINEERING SOLUTIONS which established in Mumbai, India. We are Manufacturing & Exporting Engineering & Laboratory products Our Professional practice is to provide International quality products with the best competitive prices follow with full support after sales to our esteem customers.

 

We  are the  leading supplier and exporter for the  below product segments

 

* Industrial Plant Utilities , Electro-Mechanical , MEP &  Instrumentation  products , spares and Equipment's  etc 

* Water Treatment / Waste Water treatment , STP , ETP plant design -commissioning . supplying spares 

* CEMS- Online Continuous Emission Monitoring systems for Air & Water 

* Waste Management - Manufacturer of Food Waste Compost Machines , Incineration systems 

* Alfa Labtech - Laboratory equipment manufacturer and exporter of Civil Engineering Lab Equipments, Aggregate, Bitumen Testing, Soil, Cement Testing, Geo-Technical Survey Equipments, Laboratory-Scientific Equipments, Pharma - Biotech Lab equipment, Educational and Universities Lab set up  from design to commissioning level . We do calibrate the equipments according to NABL certifications.

 

We got many repetitive  orders which we execute successfully in India & abroad especially in GCC and African Countries. Our team of engineering professionals are well equipped to serve our customers with end-to-end solutions for their business requirement. 'Customer First' attitude enable us to expand our customer base worldwide and multi fold growth over the years.

 

We request you to kindly go through the attached  profile and give us valuable chance to serve you !

Product Details:

PowerFlex® 525 AC Drives feature an innovative, modular design to support fast and easy installation and configuration. This next generation of compact drives offers embedded EtherNet / IP™ communications, USB programming, and standard safety features. PowerFlex 525 drives, which offer a power rating of 0.4...22 kW (0.5...30 Hp) with global voltage classes of 100...600V, provide a variety of motor control and flexible mounting options. PowerFlex 525 AC drives operate at temperatures as high as 700C (1580F), and they are ideal for applications such as conveyors, fans, pumps, and mixers.
Power ratings of 0.4...22 kW / 0.5...30 Hp in global voltages from 100...600VFeatures a modular design with an innovative, removable control core that allows simultaneous installation and software configuration.Offers a wide range of motor control, including volts per hertz, sensorless vector control, and closed loop velocity vector controlSupports seamless integration into the Logix environment and EtherNet/IP networks with built-in Ether Net/IPâ„¢Operates in high ambient temperatures up to 700C (1580F) with current derating and a control module fan kitOffers compact footprint relative to its power range and Zero Stackingâ„¢ mounting with 50 mm airflow gapProvides permanent magnet motor control to help improve energy efficiency and reduce related costsFeatures Safe Torque-Off which is certified at PLd/SIL2 Cat 3. Removes rotational power to the motor without removing power from the drive for faster start-up after a demand on the safety system.

Additional Information:

• Delivery Time: exstock
• Packaging Details: wooden

Product Details:

Ideal entry-level device for operator control & monitoringIdeal for compact machines with limited amount of space and applications that require HMI basic functionalityHigh-contrast 3.6" display with a resolution of 240 x 80 pixels for optimal readabilityAdjustable LED backlight color (white, green, red, yellow)Configurable keys with tactile feedbackThe mobile-phone-like keypad enables quick and intuitive operator inputs of numbers and textsComplete function scope of the HMI Basic Panels (alarm system,recipe management, trend curve functionality as well as language switching)Connection to standard Ethernet/PROFINETAttractive SIMATIC HMI industrial designProven quality and ruggedness of Siemens with IP65 protection rating

Product Details:

We supply VFD control panels which are widely used as speed controllers of alternate current induction motor. Widely used across various industries, AC drives are used to control the speed of motor by controlling frequency of supply. In AC drives, frequency and voltage are changed in same proportion for smooth performance of ac motor.

We are engaged in manufacturing quality range of VFD CONTROL PANELS, which is offered at industry leading prices. At par with international standards, it is manufactured using quality raw material, which is procured from certified vendors. The panel helps in controlling the speed of the alternate current induction motor by manipulating the frequency of supply. Moreover, for smooth functioning of the panels, the voltage as well as the frequency is changed in same proportion.
Our range is widely appreciated by clients for its following features:High performanceNoise resistanceLonger service lifeLow maintenanceSturdy construction

Product Details:

With rich industrial experience, we manufacture and supply a large assortment of MCC Control Panels, which are available with high degree of perfection as well as performance in the market. These are used to control and regulate the flow of electricity and we offer them at most competitive prices to the clients. Further, our panels are manufactured using state-of-art technology and modern machines and these are designed

Features:Easy maintenanceEasy to operateHighly efficient

Product Details:

With the AC500 PLC range we provide a reliable and powerful platform to design and create scalable, cost-effective and flexible automation solutions.
ScalableThe scalability of the AC500 PLCs is achieved by offering a large variety of devices to design and implement configurations suitable for simple control tasks or complex automation solutions.The AC500 PLC provides action flexibility with one integrated software.Cost-effectiveThe AC500 PLC range consists of various CPUs, I/O modules, communication modules, communication interface modules and accessories.The “all modules used on any CPUs concept�? in combination with our life cycle policy helps our customers to react quickly, flexibly and economically on new requirements.FlexibleOur AC500 is designed to offer the needed easiness, security and reliability to expand the automation system to new challenges.The memory, performance and the networking capabilities mean more functionality, advanced visualization, more operating comfort – for even better individual customer solutions.

Product Details:

Profometer 5+ Rebar Detection SystemMeasuring concrete cover depthDetermination of bar diameterCompact, user-friendly indicating device with backlightProVista PC software for fast data transfer and editingCan be operated in metric and imperial unitsLocation and orientation of reinforcing barsTECHNICAL INFORMATION
Indicating device Model S
MEMORY : Non-volatile memory for 40'000 measured values and 60 objects respectivelyDISPLAY : LCD with backlight optionINTERFACE : RS 232 or with Adapter for USB Port on PCSOFTWARE : ProVista for downloading data and evaluation on PCBATTERIES : 6 x 1.5V for 45h operation; 30h with backlight onTEMPERATURE RANGE : -10° to +60° C

The MicroPulser electroporator is a simple yet versatile instrument that enables safe and reproducible transformation of bacteria, yeast, and other microorganisms.

Product Details:

Product DescriptionHILTI PS1000 rebar scanner..The PS1000 X-Scan is Designed to Provide a Real-Time View of the Inside of Concrete Structures and Generates True Images Automatically.Providing clear, 2D and 3D images of virtually all kinds of objects concealed in concrete structures, the new Hilti PS 1000 X-Scan system brings non-destructive inspection of concrete structures into a new era. This new detection system which employs the pulse radar principle is able to locate various types of objects, even through several layers.

Flame Arrestors, Detonation Arrestors, Flame Detonation Arrestors are derived from its unique element design. The large channel openings provide excellent pressure drop to flow and enhanced flow characteristics often resulting in reducing overall size and cost of both Flame arrestor and piping. In addition to this the less restrictive nature of the larger channel openings result in less clogging and easier cleaning - both important maintenance considerations. Finally the element enables higher operating pressures to be achieved. The Fluidyne ‘Atmos’® Flame Arrestor after extensive research has been certified and type tested by FCRI, B.V., CCOE and other government agencies, and has also received the most stringent approval for Flame Arrestors, incorporating extended burn time performance, and have acceptance with B.P.C.L, I.O.C.L, H.P.C.L, L&T, R.E.L, R.I.L & B.H.E.L., and many other chemical, pharmaceutical , power industries and petrochemical industries.

Product Details:

We manufacture a wide range of industrial barrel pumps, barrel pump, barrel transfer pump, electric barrel pump, pneumatic barrel pumps, electric transfer pump particularly designed and engineered to meet the needs of highly productive industries. The most important feature of these barrel pump, barrel transfer pump, electric barrel pump, air-hydro booster pump, electric booster pump, electric transfer pump and functionally superior pumps is its specially developed unit the unique pump tube and the axial vane impeller or centrifugal impeller. The power on/off switch is located at the top that makes it easy to use. The rugged motor is designed having large handle grip to ensure a secure grasp when wearing bulky rubber gloves. Pump tubes used are interchangeable and can be easily connected or disconnected to the motor by means of grip collar nut.

hydraulic test pump or hand test pump are manufactured in our Mumbai factory under stringent quality control and are of robust design suitable for durability and accurate service. Fluidyne manual hydro test pump or hand test pump are suitable for testing up to 15000 psi (1000 kg/cm2). Fluidyne manual hydraulic test pumps are suitable for testing Boilers and parts, pressure vessels, castings, fabricated parts, pipelines, gas cylinders, pressure parts, etc. Pump is provided with C.S./ G.I./ SS 304 or SS316 reservoir. Hose connection in ½” to 1” in BSP or NPT is provided. Accessories like high pressure hose, check valves, pressure safety valves, pressure gauges are provided on request.

Product Details:

We have designed level gauges, indicators and valves with utmost care for getting the maximum economy accuracy and durability. Your level indicators and level gauge should have the same strength as your vessel to withstand the high pressures to which it is subjected and the corrosive characteristics of the fluid. Also, your valuable process fluid should never leak out through the glass fitting. In industries, you may have to measure the levels of colorless liquids, interface of immiscible fluids, liquids with sub-zero temperatures and liquids with too much foaming. All these requirements can be met with by our latest types of tubular level gauges, flat glass level gauges and magnetic non-contact type level indicators. 

Product Details:

Vibration analyzer DC-21 - simple and reliable companion in your journey to vibration diagnostics.
 
DC-21 has in its arsenal all neccessary functions for vibration analysis of the following industrial equipment: pumps, ventilators, exhausters, turbines, compressor, electric motors.
 
Small dimensions and weight (device itself weights only 0,8 kg), long operation period (no less than 8 hrs of work without charge), ability to work in harsh environments (IP65, temp. -20 - +50 C.), embedded software applications (run-up/coast down, shock, balancing, magnitophone) allows DC-21 to be an useful aid for everyday vibration measurement and diagnostics, as well as for vibration adjustment operationsAdditional InformationDelivery Time 4 - 6 weeksPackaging Details Vibration analyzer DC-21-?? (Main block) 1 pcs. Power supply unit BP-21-1700 1 pcs. Accelerometer 603V01 2 pcs. Magnet holder DM2 2 pcs. ??able RK76-21-1?? 2 pcs. ??able RK76-21-5?? 2 pcs. Frequency sensor FD-2 1 pcs. Holder S??D-1 1 pcs. ??able ??????-21-1 1 pcs. Cable ??????-21-10 1 pcs. Interface cable 0??-21 1 pcs. Interface cable USB-CD-21 1 pcs. Battery charger ????-21 1 pcs. Case for DC-21 1 pcs. Software Vibro12 1 pcs. Manual for DC-21 1 pcs. USB flash drive 1 pcs. Transportation bag 1 pcs.

Sauer Danfoss : PV20; PV21; PV22; PV23; PV24; PV25; PV26; PV27; PV91. Sauer Danfoss : SPV2/089; SPV6/119; SPV14; SPV15; SPV18; SPV118.

Sauer Danfoss : PV20; PV21; PV22; PV23; PV24; PV25; PV26; PV27; PV91.
Sauer Danfoss : SPV2/089; SPV6/119; SPV14; SPV15; SPV18; SPV118.

Product Details:

A Reliable, Rugged and Accurate TransmitterEach MCT460 measurement produces analog and digital outputs for control.Bus Interfaces, such as Ethernet, Modbus, Profibus, etc are also available.The MCT460 is made up of 5 basic components: a quartz halogen lamp, a filterwheel motor, multiple NIR interference filters in a rotating filter wheel assembly,a Lead Sulfide detector and a single “smart” circuit board. The MCT460 is fullymodular – each of these components can be replaced in the field within minutes.The Near Infrared (NIR) Operating PrincipleLight from the lamp is directed through the rotating, narrow band-pass NIRfilters. The filters separate the light into NIR wavelengths, selected specificallyby PSC for the measurement and application being performed. The NIR light isthen directed onto the product being measured, normally on a conveyor belt ormoving web.Subsequently, the light reflected off of the product is captured by a mirror andfocused onto a Lead sulfide detector. The detector’s microvolt output is thentaken by the on-board “smart” circuit board and converted into percent moistureor other engineering units

Product Details:

SOKKIA B 40 A (Advance)
• Automatic Level• Magnification : 24 X• Accuracy : 2.0 mm• Objective aperture : 32 MM• Resolving Power : 4 “• Compensator : Magnetic damping system• Setting Accuracy : 0.5 “• Working Range : + - 15 MinsWith inbuilt Accessories• Instruments• Lens cap• Plum bob• Vinyl Cover• Cleaning Cloth• Tool Kit• Operators Manual• Carrying case• OKKIA 12 months Warranty Card and Calibration certificate included

Product Details:

Enhanced ease-of-use, functionality and performance in an automated sample-tube handling system for unattended analysis of up to 50 samples. Concurrent desorption of the next sample while the current sample is undergoing GC analysis optimizes productivity.

 

Allows the ability to condition tubes during chromatography to minimize downtime and enhance productivity and also includes separate trap clean and test function, which saves time and protects the GC column and detector. Also incorporates the ability to re-collect sample for repeat analysis, the ability to perform dry purge without the internal standard accessory and the ability to perform tube and trap impedance measurement as a diagnostic of system performance.

Provides truly outstanding analytical performance in an automated sample-tube handling system for unattended analysis of up to 50 samples.

Product Details:

Stelometer is used to check for the possible adverse effects of certain fiberpreparation methods and to ensure that the dyeing process does not harm thefibers. Fiber strength & elongation determine the “toughness” of a fiber: only astrong fiber can produce a strong yarn, and fiber that elongates under tensionimparts a stretching quality to the finished fabric. So a measure of these two fibercharacteristics is important to the yarn spinning industry. Since fiber strength &elongation helps to determine the quality of yarn and finished fabric, purchasersof fiber use the stelometer to measure two characteristics to ensure the quality ofthe fiber being bought. Researchers use stelometer strength and elongationmeasurements in their effort to develop stronger and more resilient cotton andanimal fibers And man-made fiber producers use the same measurements as apart of their production and quality control procedures.

SHATTER INDEX TESTER Mechanism: Consists of base, pillar, ejection mechanism, anvil, sieve and pan.
Misc Spec.: …
Sand Type: Green Sand
Test:Determines the shatter index of prepared Green Sand
Application:
To determine the Shatter Index of prepared Green Sand
SpecificationsWidth: 430Depth: 400Height: 2200Weight: 80Utility: ..Range: —-Precautions:
Level the instrument perfectly.
Clean the sieve unit before and after TEST

Used for testing crushed rock, crushed slag, crushed and uncrushed gravel for resistance to abrasion.
Specification:The machine consists of a hollow cylinder mounted horizontally on a sturdy frame on ball bearings. There is an opening which can be closed with a dust tight cover to facilitate charging and discharging the drum with the material under test. A detachable shelf which extends throughout the inside length of the drum which catches the abrassive charge and does not allow it to fall on the cover. The drum is rotated by an electric motor through a heavy reduction gear at a speed of 30-33 r.p.m. A revolution counter is fitted to the frame. A tray is supplied for collection of the material at the end of the test. Complete with abrasive charges consisting of a set of twelve hardened steel balls, approximately 48mm dia. Suitable for operation on 440 volts, 3 phase, 50 cycles, A.C. supply

For density tests on aggregates as per procedure laid down.Salient FeaturesSpecifications: Made of brass with stainless steel wire mesh 6.3mm size ruggedly constructed, approximately 20cm dia x 20cm high. Complete with handle.

Buoyancy Balance helps in determining the specific gravity and for the water absorption of the aggregate. It is fitted with the 15 kg capacity x 0.5 gm of the electronic balance. The frame is supplied with:• Water tank,• Suspension hook• Lever for lifting the water tank manually

Features:

• The actual load application system is of dead weight type combined with a mechanical lever system. The supporting hydraulic system is for the initial lifting of the load before each test and dampening the load application system for smooth application of load.
• A separate hydraulic power pack, positioned in the bottom part of the machine adds to the mechanical stability.
• Our unique design of a floating fulcrum lever system ensures high accuracy and dependability.
• An automatic indenter index system is provided which tilts the indenter after the impression and the magnified image is visible on the IPC for area measurement & display of hardness value.
• Thus this machine saves a lot of cycle time, improves the accuracy of measurement and gives fast and accurate results with less operator fatigue.
• This model is mainly used for production testing in Auto shops, Foundries, Forging Shops and Heat treatment units, etc.
• The machine accuracies confirm IS 2281 2005 & BS: 240.

This Apparatus is used to determine aggregate impact value of coarse aggregate. The hammer of the tester fall freely from 380 mm height on coarse aggregate for 15 times/15 sec.the crushed aggregate removed from the cup ,then sieved and weighed. The % ratio of the weight passing 2.36mm sieve and weight of oven dried sample is Aggregate Impact value.Salient FeaturesSpecification :The instrument consists of a circular base with two vertical guides. The hammer of weight 13.75 ±0.25 kg can be raised to fall freely down the vertical guides. The height of fall can be adjusted through 380 ± 5mm. The hammer is provided with a locking arrangement. The hammer falls freely to the base and is removable for emptying. Supplied complete with metal measures 75mm dia x 50mm high (for specimen preperation) and tamping rod 230mm long x 10mm dia.

Abel Flash Point Apparatus is suitable for determining the close cup flash point of Petroleum and mixtures according to IP 33 & IP 170 and also IS 1448 (Part I) 1985 (P:20). It is suitable for oils whose flashes below 70°C. It is supplied with oil cup, cover fitted with stirrer, thermometer socket S.S. Water Bath, Stand. An electric heater is fitted at bottom for operation on 220 Volts AC Circuits. Following Models are available:-Abels Flash Point Apparatus electrical heating with Energy Regulator Control – Oil Test Jet.Abels Flash Point Apparatus electrical heating with Energy Regulator Control & Concealed Hot Plate – Oil Test JetAbel Flash Point Apparatus with Regulator DIGITAL TEMP. INDICATORAbel Flash Point Apparatus with Regulator, DIGITAL TEMP. INDICATOR with geared FHP. Elect. Driven Stirrer (120 R.P.M)Abel Flash Point Apparatus Temp. Range -18°C to +70°C with REFRIGERATION SYSTEM as per IP-70 with Oil Test Jet system. With digital temperature. Indicator and FHP motor stirrer.
Salient FeaturesOPTIONAL ACCESSORIES:Abel Oil Cup Thermometer (-35 / 70 C x 0.5°C) IP 74 CAbel Water Bath Thermometer (-30 / 80 C x 0.5°C) IP 75 CPolish Wooden caseSpare cup for above ApparatusSpare top (Cover Assemble) with Shutter mechanismSpare Nichrome Heating elementPendulum for Measuring Time in StrokesConcealed Hot Plate with housing

This device was developed by U. S. Bureau of Public Roads and is used to measure deflections of flexible pavements. The light weight instrument is supplied in two parts for assembling on site with easy hand tools. In use one end of the beam rests at a point under investigation while the beam is pivoted at the centre. The free end carries a dial gauge to record the deflections. The other end is kept on a stable platform. The beam ratio is 2:1 which magnifies even small deflections. Supplied with a dial gauge 0. 01 x 25mm. This is a light weight dismantleable instrument and easy to carry.

It is used for determination of combustion of calorific value of solid and liquid fuels. The Instruments consists of S.S. Body made out of corrosion resisting stainless steel Rod cap. 300ml., Calorimeter vessel, outer jacket with insulated Body, offset stirrer, S.S. Crucible, pellet press, ignition wire, pressure gauge with flexible pipes with electronic firing unit.Bomb calorimeter apparatus with digital thermometer 0.1°C Read OutSame as above with Digital thermometer 0.03°C Read Out and Remote Control SystemBOMB Calorimeter apparatus with 0.01°C Read Out and Remote Control System and Printer Unit- Same as above -- with Micro Processor. Unit with PC suitable to use with computer with printer for detection of maximum rise of temperature resolution 0.01°C LCD Display- Spare Bomb 300ml. cap.- Spare Stainless Steel Crucible- Spare Neoprene washer, Belt O Ring and Valves (Kit)- Spare Nichrome wire 10 meters Roll.

It is made as per IP 14, ASTM 524 and IS 1448 (P:8)- 1967 Standards. It is used to determine the amount of carbon deposit when oil evaporated under specified condition. The apparatus consists of a solid metal bath having 5 wells to accommodate cocking bulbs, the heavy duty heating elements provided around the bath. Supplied with 5 cocking bulbs, and one syringe.Rams bottom Carbon Residue Apparatus with temp. regulation by energy Regulator,thermocouple and Digital Temp. Indicator in separate cabinetRams bottom Solid state Electronic digital temperature controller PID type in separate unit
Salient FeaturesOPTIONAL ACCESSORIESSpare Cocking bulbSpare heating element for aboveSpare syringeStainless Steel Tong

This is made according to specification laid by IP 15 & IS 1448 (P: 10) 1970. The pour point is lowest temperature at which the oil will just fail to flow. The apparatus Consists main cooling bath made out of S.S. sheet and stand unit with drain plug and cover has provision for fitting thermometer and a filling aperture for adding freezing mixture. A Glass jar for containing oils, Jacket, disc and gasket as specified are also provided.Cloud & Pour Single with insulated bodyCloud & Pour Point two test with insulated BodyCloud & Pour Point Four Test with Insulated BodyCloud & Pour Point Six Test with Insulated BodyCloud & Pour Point App. with REFRIGERATION SYSTEM (for 2 test app.) upto -30°C
Salient FeaturesOptional AccessoriesCloud & Pour Point Thermometer IP 1CCloud & Pour Point Thermometer IP 2CSpare Glass Jar with corkSpare Metal Jacket with DiscPolish wooden case for –Single test. For – four test, six tests.Rexine Dust cover for refrigeration unit.

AS PER IS: 2386 The machine is used to determine the resistance of aggregate to wear by abrasion.Salient FeaturesSpecification :It consists of two hollow cylinders closed at one end and provided with tight fitting covers at the either end. These cylinders are mounted on a shaft at an angle of 30 degrees with the axis of rotation of the shaft. The shaft rotates at 30-33 r.p.m. through a reduction gear operated by a motor and is provided with a revolution counter. Complete with abrassive charges consisting of 12 Nos. Hardened steel ball of 48mm dia. Suitable for operation on 440 volts, 3 phases, 50 cycles. A.C.supply.

Product DescriptionThe unit consists of a pressure vessel with clamp for sealing cap, capacity. Rubber sealing gasket,pressure gauge calibrated in percentage moisture content on the wet weight basis, a counter poised balance for weighing sample, a scoop for measuring carbide reagent, a bottle of reagent, one cleaning brush and a set of 4 steel balls for thorough mixing . Complete in highly polished wooden carrying case with handle.
Spares:Carbide reagent, in bottles of 500 gmsEach available on extra cost

This is used for determination of in situ dry density of natural or compacted fine grained soil, free from aggregates. A cylindrical cutter is used to extract a sample of the soil with the help of a dolley and rammer. From the weight, density and the moisture, and dry density of the soil is readily calculated.Salient FeaturesSpecifications :It consists one each of : Cylindrical core cutter made of steel, 127.3 mm long and 100mm internal diameter. Steel Dolley, 25 mm high with a lip to enable it to be located on top of the core cutter. Rammer with detachable steel rod.
Spare, Optional Extra and Accessories:1) Cylindrical core cutter 100 mm I.D. x 175 mm long.2) Cylindrical core cutter 100 mm I.D. x 175 mm long.3) Cylindrical core cutter 100 mm I.D. x 175 mm long.4) Dolley.5) Test form pad of 50.

This cone is used to find out viscosity of Bentinite slurry and like material. The Marsh Cone is 6 inch in diameter at the top and 12 inch long, and tapers to join a tube 2 inch long and 3/16 inch inside dia. The capacity of the funnel is 1500 cc. Time in seconds required to flow out 1000 cc of slurry from cone is measured as funnel viscosity of the material.

Offering the best quality Box Sextant. This Sextant is made by high quality material and it has perfect finish.

PBM is a device for the following,Micron and sub-micron grinding.Alloying.Mixing of solid -solid and solid- liquid to produce a truly homogenous product in a very short time.The above machine can be used for analytical purposes, control of process parameter and scaling up. It is mostly used for expensive materials, which is available in small quantity and with no- loss in grinding process and less contamination. PBM is by far the best device to develop new parameters. In the case of grinding hard pure material this is the only option.We can supply a PBM with the following;Four bowls, two bowls and a Single bowl.Capacity of the bowls – 500 ml, 250 ml, 150 ml and 100 ml.
Salient FeaturesAdvantages:Micron sub micron generation.Four samples can be made at a time.Very small quantity of sample can be used.No contamination by the bowl and the grinding media.Cycle of grinding time is very less.It can be used for grinding material up to -250 mesh within a very short time.Zero loss on handling.No vibration and no noise pollution while the machine runs.Can be used with inert atmosphere.Special cooling arrangement can be provided for the bowls.Simple to operate and no special skill are required.Working of the machine is automatic.Occupies less space.
Features of Control Panel:Variable frequency controlSpeed ratio (revolution : rotation) 1:2Timer: 1 – 999 minutes.Alternating operation time: 1 – 99 minutes.Maximum continuous working hours(full load): 72 hrsManual or automatic timed forward or reverse rotation.Control panel: Variable frequency, step less speed regulation, programmable controls, LED display, automatic timing positive inversion and time off.

This instrument is used for measuring porosity, air permeability or air resistance of paper and paper products by determining the time necessary for a certain volume of air to flow through the inserted sample, under a uniform pressure.

 

Extra Option: Electronic self starting timer as an optional accessory, for automatic measuring of air to pass through the test specimen. The timer starts automatically when the zero slit of the graduated ruler pass an optional read fork and stops automatically as soon as the predetermined volume of air has been passed through the sample.

Manufacture of Brass Cable Glands Such As Pg Cable Glands, Bw Cable Glands, Cw Cable Glands, Cw4 Cable Glands, E1w Cable Glands, Cable Glands Accessories, A1/A2 Cable Glands, Marine Cable Glands, Alco Cable Glands, Wiping Cable Glands, Trs Cable Glands as Per Customer Drawings And Specifications.
Cable Gland Kits, Brass Adaptors, CNC Parts, Galvanized Conduit Fitting, Sprinkler Irrigation Parts.

we first want to congratulate and  appreciate your commitment towards the environment protection by eradicating single use plastics and shifting towards sustainable alternative from petro based plastic bags to Bio polymers .
In addressing our commitment towards the environment our company has introduced an innovative compostable bioplastic  made of Bio- Polymers which brings a whole new solution to plastic pollution problem and  can save precious fossil and tree resources while providing the same convenience to our lives.After serving its varied purposes  can be treated as compost where natural occurring micro organism will decompose it completely into carbon dioxide (Co2) and water, returning to nature cycle without leaving any harmful effects behind.

Our products include Compostable Apparel bags, Compostable Garbage Bags, Compostable Carry Bags , Compostable F&V rolls and Compostable Grocery Bags. Also in our journey of Product Enhancement and Leveraging Technology to deliver only genuine products we have introduced a Dynamic Encryption Code (QR Code) that will provide a Unique ID Number for every bag manufactured with additional information on our Certificate to Manufacture and Sell Products.
Our Clients include Industry Leaders in  Organised Retail Industry ,Textiles , Restaurants, Supermarkets , Airports, IT, Hospitals, Jewellers, Online Retailers and Food delivery Partners.
Our high production capacity has enabled us to produce quality products at a very competitive price. We also have multi colour flexo graphic and Rotogravure printing facilities upto 8 colors in-house.  

The instrument measures crease folding force at 90°, board stiffness at 15° and requires no external software for operation. It automatically calculates the crease to board stiffness ratio for instant indication as to whether the material will run correctly on a high speed packaging machine.

Hioki MR8880-20 Memory Recorder are high-speed waveform monitoring and recording devices that can simultaneously measure multiple quick-changing phenomena due to complete isolation between channels and from each channel to the ground. The MR8880 is a data acquisition (DAQ) recorder built in with 4 analog channels that can accept direct input of 600V, enabling measurements of 3-phase systems. 

 

Key Features :

• CAT III 600V isolation performance; directly measure a 480V power line
• 4 completely isolated channels let you simultaneously record data on a 3-phase power line plus have one extra channel
• Tough against harsh environments; -10°C to 50°C operating temperature range
• Built to withstand mechanical shocks and vibrations (ships standard with side protectors)
• Make settings easily with PRESETS function

Our firm ensures to comprehend and meet the diverse requirements of customers, by offering a superior range of Torry Meter Fish Freshness Meter. Fabricated using the finest grade raw material and sophisticated technology, this product is designed in compliance with the international quality standards. This product is essential for the accurate measurements of oxygen levels for various applications in water treatment plants, sewage treatment works, effluent activated sludge process, river monitoring and fish farming.
We are the suppliers Torry Meter Fish Freshness meter, Fish Fat meter, Meat Fat meter for instant results. Pre-calibrated for different species.

Useful for researchers, exporters, retailers of fish and meat.


Other Details:

In addressing our commitment towards the environment our company  is dealing into innovative compostable bioplastic made of Bio- Polymers which brings a whole new solution to plastic pollution problem and  can save precious fossil and tree resources while providing the same convenience to our lives.
After serving its varied purposes  can be treated as compost where natural occurring micro organism will decompose it completely into carbon dioxide (Co2) and water, returning to nature cycle without leaving any harmful effects behind.
All our products are certified by Central Pollution Control Board, New Delhi India and as per  IS ISO-17088 standard  and we also have been certified by TUV Austria  OK Compost Industrial.

Please find attached our offer for Compostable  & Biodegradable Garbage Bags.  We deal into BIO- OXO Degradable  garbage bags  as well 
Our Clients include Industry Leaders in Organised Retail Industry, Textiles, Restaurants, Supermarkets, Airports, IT, Hospitals, Jewellers, Online Retailers and Food delivery Partners.

We are pleased to introduce ourselves as one of the leading manufacturers of P.P Filter Presses in India.Our state of the art of manufacturing plant is located at Chhatral, approx. 45 kms from Ahmedabad, We have in-house facilities for manufacturing Filter Presses size ranging from 300 mm X 300 mm to 1500 mm X 1500 mm in different type of designs.

We are manufacturing Manual,Semi Automatic and Fully Automatic Filter Presses with world-class standards.We also Supply Membrane Filter Presses Up to 16 bar design Pressure.We also make custom made filter presses as per customer’s specifications and requirements.

OUR RANGE OF PRODUCTS:-

• RECESSED FILTER PRESS.
• PLATE AND FRAME TYPE FILTER PRESS.
• MEMBRANE FILTER PRESS.
• CGR TYPE FILTER PRESS(ZERO LEAKAGE TYPE).
• AUTOMATIC FILTER PRESS WITH PLATE SHIFTING.
• FULLY AUTOMATIC FILTER PRESS WITH PLC OPERATION.
• FILTER PRESS WITH CONVEYOR BELT.
• GMP TYPE FILTER PRESS.
• QUICK OPENING FILTER PRESS.
• CONTINUOUS PLATE SHIFTING FILTER PRESS.

Today we are catering to industries such as Dyes,Intermediates,Pigments,Ceramics and Clay (kaolin), Iron ore ,Edible Oil, Insulators, ETP, STP, Starch,Chemical,Pharma,Bulk drugs etc.

Product Description

Hydrajaws - Model 2050 Pro (D) Metric Tester Kit is the mid heavy duty fixing tester enable engineers to confirm the holding powers of anchors in most construction materials, either for the purpose of establishing safe working loads or to validate the correct installation of existing fixings. The tensile load of upto 50 kN applied to the fixing mechanically and hydraulics are used to register the load through an accurate analogue gauge making the tester very reliable.  The load spreading bridge keep reaction loads away from the fixing. Fixings upto M16 may be located directly in the tester,while a veriety of adaptors enable a wide range of other types and sizes to be tested.

M2050 Pro Test Kit Features:

*up to 50mm of Stroke.

*Detachable 50kN (5 t) Dual Scale digital gauge.

* 2050 Spreading Bridge with telescopic legs and hardened pins.

* Turning Handle with integral 24mm Nut.

* M12 Locking Adaptor.

* M12 Ringbolt Adaptor Clevis

* Bolt Tester Adaptor.

* Threaded stud adaptors: M16, M20 and M24.

* Button Adaptors: M10, M12 Threaded, and 6.5, 8.5, 10.5, 12.5 Slotted.

* Robust carry case with grab handle.

Sieve analysis (or gradation test) is a practice or procedure used to assessthe particle size distribution (also called gradation) of granular material.Gyratory Sieve Shaker facilitates the sieving process.Unit can take upto seven sieves and lid & receiver. The sieves table is inclined tothe vertical axis and the direction of inclination changes progressively, in aclockwise direction. In addition to the gyratory motion of the table, there is anupward & downward movement, ensuring that each square centimeter of thesieve is utilized. The whole gear mechanism runs in grease. Unit is fitted withmechanical / digital timer 0 - 60 minutes. Suitable for operation in 220 Volts,Single phase power supply.Models available – for 20cm, 30cm and 45cm diameter sieves.(Unit is supplied without sieves, sieves to be ordered separately)

Consists of a metal box fitted with a series of chutes of equal width which discharge the materialalternatively in opposite directions into separate pans. Slot Width 12.5mm or 25mm, no. of slots16 SlotModel available areWidth 50mm, no. of slots 8.

For determination of the resistance to wear of small size aggregates and crushedrocks. The machine consists of a hollow cylinder mounted on a sturdy frame onball bearings. A detachable shelf which extends throughout the inside length ofthe drum catches the abrasive charge and does not allow it to fall on the cover.The drum is rotated at a speed of 30-33 RPM by an electric motor through aheavy duty reduction gear. Motor is suitable for operation on 440 volts, 3 phase,A.C. supply. The unit is supplied complete with a tray for collection of thematerial with abrasive charge.

Cable fault locationThe shortcut to the source of a fault

In spite of major developments in this field, faults still occur frequently in cable systems for various reasons. In addition to trained personnel, you also need very efficient equipment to rectify faults.
 

BAUR cable fault location devices and systems cover the entire cable fault location process: During pre-location, the position of the fault is roughly located. The subsequent pinpointing enables precise determination of the cable fault. You can use various measurement methods depending on the kind of fault and cable type.

Owing to the vast experience and knowledge of this domain, we have been able to supply and trade a wide range of Body Mass Index Machines.

These machines are commonly used to determine the body mass index of various individuals. Owing to the impeccable design and fine finish, these machines highly demanded in the market.

Features:

• Impeccable design
• Fine finish
• User-friendly operations

Applications:

• ideal choice for hospitals and clinics
• Schools
• Physical examination centers
• Health clubs
• Gymnasiums

Main Features:

• Automatically measures weight, height & body mass index accurately & rapidly
• Displays weight, height & Body Mass Index
• It also displays, simultaneously, how much over / under weight you are

Accessories:

• Thermal Printer can print Date, Time, Weight, Height, BMI & amount of overweight / underweight
• Coin selector to operate the scale only on insertion of coin
• Voice (Audio) Output

Product Details:

DESCRIPTION:

The OPSA-150 is a new organic pollutant monitor that uses HORIBA's proprietary Rotary Cell Length Modulation, a measuring technique incorporating 25 years of expertise. The unit can be used as an organic pollutant monitor at drainage systems for determining compliance with COD/BOD monitoring regulation, for monitoring quality of water measuring levels of organic matter at water supply intakes, ands as an organic monitor on process lines (phenol meter).

FEATURES:

Sensor that makes full use of Rotary Cell Length Modulation (Patented)
Zero drift correction is performed in every cycle of measurement. This correction can eliminate the effect of any interference on cells.
Cell length modulation provides readings from multiple measurements, making available results from various cell lengths. This allows the single device to make measurements on a large range of concentrations from as low as 0 to 0.1 Abs, up to 0 to 5.0 Abs.

TYPE OF INSTALLATION:

Extraction

IN SITU

TC3231 Thermal camera

You’re on site, trying to find a fault quickly and the pressure is on. Rather than checking every circuit manually, or dismantling a whole motor, there is a much faster and safer option - the TC3231. This specialised thermal camera combines a traditional thermal camera with several advanced features to make finding faults quick, easy and accurate.

• 32 x 31 pixel screen resolution
• Hot and cold spot measurement
• Micro SD memory for storing up to 6000 images
• Measurement range -20 C to 300 C / -4 F to 572 F
• True image blending with thermal image

This is for the determination of there sub sieve particle distribution in a soil sample by mechanical analysis. An analysis of this kind expresses quantitatively the proportions by weight of the various sizes of particles present in the soils. It is recommended as a standard procedure to use dispersion agent to avoid floculation.Salient FeaturesSpecifications :The apparatus consists of a sliding panel which moves up and down by means of a screw allowing Anderson pipette fixed to it to be raised or lowered vertically. A sedimentation tube is held by a laboratory clamp provided on the stand below the pipette. The depth of immersion is measured by a scale graduated in mm at the side of the sliding panel. Supplied complete with Anderson pipette 10 ml. at the side capacity made from glass, and a sedimentation tube also of glass of 500 ml capacity and 50 Nos Test forms.

Accessories & Spares :1) Sedimentation pipette (Anderson pipette) 25ml.2) Sedimentation tube 1000ml.3) Sedimentation pipette 10ml.4) Sedimentation tube 500ml.5) Test forms pad of 50.

Pfeuffer He-Lite

Handy moisture meter, accurate and reliable during harvesting, drying and storing. Sturdy moisture meter for agriculture.

* High measuring range

* Easy menu operation

* Proven principle of measurement

* Averaging

* Favourable price

The moisture content is decisively significant for the determination of the correct harvesting moment. The HE lite has been especially designed for this function.

It is used for the control of the moisture on the field during the threshing process and for checking the moisture absorption inside the combine-harvester.

The HE lite is used for the regular moisture measurement during the drying process and during the storage to avoid losses in quality. 
The HE lite is suitable for the moisture determination of cereals, oilseeds and humid maize.

Pfeuffer He-50

* Very easy handling

* Fast measurement

* High precision

* Automatic temperature correction

* High measurement range to over 30 % moisture

*14 calibrations included

Reliable in the field and for drying and storage.

 

The measurement cell which has been specially developed for agricultural use allows the most diverse products to be measured.  The homogenisation of the sample in the new measurement cell creates the best conditions for precise moisture measurements.  This means that the HE 50 offers great reliability for freshly harvested grain and other crops within a wide measurement range.

Granomat

Fully automatic moisture meter made for Seed Production, Grain Trade and Stores, Warehouses, Malting and Feed Plants.

* No Grinding

* Fully Automatic

* Integrated Printer

* High Precision

* Easy Handling

* Big Sample Volume

 

The Granomat measures the capacity (dielectric constant) of the whole grain sample. It determines the moisture of the product as well as the bulk density (specific weight) of the whole corn. Grinding of the sample is not necessary. The Granomat can test all cereals, legumes, oil seeds, maize and malt. The memory stores up to 100 different calibrations. The sample volume is 600 ml.