Analytical Instruments

Product Details:

Lumi™ Single Tube Luminometer

Coulgen Biotech Pvt Ltd  offer a Lumi™ Single Tube Luminometer from MicroDigital. Korea . Tube luminometer is an instrument that measures weak emissions of visible light coming from a sample, by means of a photomultiplier tube. Its embedded PMT technology precisely measures light emitted from chemiluminescence reaction. It is used to evaluates surface cleanliness by measuring the chemical marker adenosine triphosphate (ATP), a compound found in all types of plant, animal and microbial cells.

The Lumi™ Single Tube Luminometer is comparable to GloMax 20/20 luminometer based on the product specifications.

Brand: Lumi™ 

Manufacturer: MicroDigital Co.Ltd.

Main Features:

·         Low noise, high-sensitivity PMT embedded

·         Easy maneuver/operation with 7" touch LCD

·         Easy back up with USB flash drive

·         Parameters: End Point, Kinetic

·         Compact size and easy to use with a cuvette

·         User-friendly interface with wide range of parameters

·         Simple data backup and software upgrade via USB Flash Drive

Product Details:

Portable Flue Gas Analyzer  is multigas analyzer which measure O2 & CO gas. CO2 is derived.

Easy to maintain and service from user point of view, the analyser is customisable to specific measurements and process stream conditions. A resilient stainless steel probe with thermocouple and condensate trap extracts the gas sample from stack / duct.

Portable Flue Gas Analyser has long-life, eight-hour battery charge. It can be started up and ready to measure within minutes. It is supported by automatic zero calibration and continuous system diagnostics to maintain excellent analytical performance throughout its operation. Robust and lightweight, is easy to transport and use.

Features 

·         32-Bit Cortex-M3 ARM Processor

·         Automatic zeroing when the analyzer is switched ON

·         Robust/Rugged design that is easy to operate and maintain

·         Fast warm-up and response

·         Rechargeable battery operation

·         Built in sample pump, filter and flowmeter

·         Condensate removal

·         Stainless steel probe with sample hose

·         Battery lifetime up to 8 hours

·         150 set of data storage

·         USB for Charging & Data communication

Product Details:

Horiba's TOC Analyzer uses differential conductivity technique. Simple and straight forward.

Which means:
* No patented costly memberanes to replace incase of problems.
* No requirement to purchase standards from supplier
* No costly consumables.

Product Details:

We are offering our clients a vast range of Three CT Analyzer which is manufactured at vendors' end utilizing high quality materials and advanced technology. Owing to extensive features, this analyzer is widely acknowledged in several engineering organization. In order to assure quality and accuracy, the analyzer offered by us is strictly checked on various parameters by our quality experts. Apart from this, our prestigious patrons can avail the offered analyzer from us at market leading prices.

Features:

• Durable
• Highly sensitive
• Fast working

Description:

• Ideal handy tool for field studies – 3 phase 3 CT analyser
• Bluetooth, Ethernet and USB
• 17 types of connections
• Magnetic Latch for instant mounting
• Removable SD card
• Android app for real-time views and configuration

MEASURES

• AC/DC Voltage
• Frequency - 50, 60 & 400 Hz
• AC/DC Current
• V & I Crest Factor
• kW, kVA, kVAr
• PF, Cosø, Tanø
• 4 Quadrant Energy
• THD, Harmonics up to 50 th order

SALIENT FEATURES

• High electrical safety standards as IEC 61010, CAT IV 600V/ CAT III 1000V
• Magnetic Latch for instant mounting and removal on electrical panels
• 17 types of electrical connections possible
• Bluetooth interface, USB and Ethernet communication
• Data logging & data retrieval possible directly from SD card
• Auto CT recognition, accepts up to 9 different CTs for measurement
• Simultaneous data logging and harmonic analysis
• Complete freedom to select time interval and duration
• DataView software for data download/ retrieval and report generation
• Android App for instrument configuration and viewing of real-time data through Bluetooth

Product Details:

As per the variegated requirements of our clients, we are offering a broad collection of Gas Analyzer. Moreover, optimum performance and functionality are some of the factors that increase the demand for our offered range in the market.

 

Information:

Cordless handheld oxygen or combined oxygen/carbon dioxide analyzer for checking modified atmospheres in food packaging (MAP). The ideal instrument for portable, fast and accurate sample tests at the packaging machine, in stores or in laboratories.

 

Benefits:

• Minimal sample gas requirement for testing even the smallest packages
• Cordless operation using rechargeable batteries
• Simple one-handed operation
• Sample flow control with warning in case of blocked needle
• Easy to clean
• Large illuminated graphic display
• Measurement alternatively also by hose
• Multilingual menu guide: German, English, French, Italian, Dutch, Swedish, Finnish, Spanish, Polish, Japanese and Russian
• Integrated needle cover to protect needle and user
• Long lifetime of O2 sensor (approx. 2 years)
• Low maintenance costs

Complete in carrying case:

• Charging device and adaptor set
• CD-ROM with operating instructions
• 2 spare needles
• 2 spare filters
• set of 100 rubber seals

 

Options:

• Hose with luer-lock connection for stationary measurement
• Can/bottle piercers
• Table rack/stand

O2- and O2/CO2- gas analyzer for MAP-packages, standard version

• ideal for quality control
• fast and precise sample testing
• minimum sample gas requirement
• O2 value is displayed in 0,01% steps
• long lifetime of O2 sensor (approx. 2 years, depending on use)
• portable and rechargeable

Product Details:

Product Specification

Product Details:

Product SpecificationBrand HachMeasuring Range 0 - 100 mg/L CPower supply TIC/TOC - 230VRepeatability 3 %Display Type High contrast 40 character x 16 line backlit LCD with LED backlightWeight 46 kgPower Requirements 50 Hz, 230 V ACPermissible Chloride Rnge Up to 30 % w/vOxidation Method Unique Two-Stage Advanced Oxidation Process (TSAO) using Hydroxyl RadicalsParticle Size Up to 100 micro mService Interval 6 month service intervalsUser Interface Microcontroller with membrane keyboardOperating Temperature Range 5 - 40 DegreeCSample Inlet Temperature 0 - 60 DegreeCRange Selection Automatic or Manual Range SelectionLanguages English, Spanish, French, German Others available upon request.Data Storage Previous 9999 reaction data, Previous 99 fault eventsCycle Time Typically 5 minutes 30 secondsAmbient Temperature 5 - 45 DegreeCExceedance Tracking Full exceedance tracking up to 100 mg/L CHumidity 5 - 85 % (non-condensing)Multi-Stream Up to 2 process streams and grab sampleMeasurement Method Infrared Measurement of CO2 after Oxidation (DIN EN 1484:1997-08, ISO 8245:1999-03, EPA 415.1)Number of Channels 1 Channel / Grab sample-Calibration Port (includes two 4-20mA outputs enabled as standard)

Product Details:

Magnetic stirrer with heating and ceramic heating plate which offers excellent chemical resistance.

 

• Powerful motor for stirring quantities of up to 15 l (H2O)
• Simultaneous digital display of target and actual temperatures via LCD display
• Directly connection for a PT 1000 temperature sensor enable a precise temperature control (included in delivery)
• Control accuracy in medium +/- 0,5 K (in combination with PT 1000)
• Display of actual temperature value in medium with 0,1 K resolution when using PT 1000 temperature sensor
• 3 operating modes to choose (standard, safe, adjustment protection)
• Fixed safety circuit of 550 °C
• Hot Top indicator >> hot surface warning to prevent burns!
• Digital error code display
• Elevated control panel for protection against leaking liquids.

 

Technical Data:

Product Details:

Fluke 1770 Series Three-Phase Power Quality Analyzers eliminate the complexities of power quality logging, troubleshooting, and analysis. Engineered to be the faster, easier way to perform power quality studies, the 1770 Series offers automatic measurements, a straightforward user interface and setup, best-in-class specifications, and a simplified reporting platform. The instrument can also be powered directly from the measurement circuit, eliminating the need to find a power outlet or use a lengthy extension cord

With the 1770 Series you'll never miss a critical power quality event—from fast transients up to 8 kV, harmonics up to 30 kHz, dips and swells, as well as the voltage, current, and power measurements that enable you to characterize your electrical system.

Key features

• New Firmware Update: Energy Loss Calculator
• Automatically measure power and power quality parameters
• At-a-glance power quality health for faster troubleshooting
• Easily view V/A/Hz, power, dips, swells, and harmonics data
• Capture high-speed transients up to 8 kV
• Power directly from measurement circuit without a line cord

Product Details:

The company is engaged in the manufacturing and supplying of Universal Extractor Frame all over the country. The Universal Extractor Frame (Sample Extractor - Screw Jack Type) consists of adaptor plates and plunger plates for 38mm, 75mm, 100mm, and 150mm diameter specimens. The Universal Extractor Frame can be availed from us at affordable prices.

Specifications
Type Hydraulic Extractor FrameUse Lifting Automobile Spare PartsWeight 100-200kgColor NaturalVoltage 110VAutomatic Grade AutomaticPower 1-3kwDriven Type HydraulicWarranty 1 Year
Submit Your Requirement

Product Details:

FEATURES :

·         Reasonably priced model of in-line NIR moisture analyzer

·         Measures moisture on the production line in real time

·         Rated as IP66 water and dust protection grade

·         Uncoated finish prevents rust and peeling paint from mixing into the line

Product Details:

With the help of our modern transport facility, we have been able to cater the varied needs of the clients by providing them Sound Level Meter in large quantity within stipulated time-frame. It is made using high grade raw material and cutting edge technology to ensure flawlessness. It is tested on various quality parameters to check all quality flaws, thus assuring our clients that perfect level meter is being offered to them. This level meter is available in various specifications to meet the varied needs of the clients at rock-bottom price.

Specifications:

• Sound Level Meter SL 4005
• Conforms to International Standard
• Multi Functional Sound Level Meter can measure Sound Level (Lp)
• Equivalent continuous 'A' Sound Level (Leq) Maximum Sound Level
• (L max) percentage of all reading over alarm value set (LN)
• 'A' 'C' or flat weighing and Slow /Fast response time built in calibration
• Alarm set and output & APO Function Compatible to RSF 232 interface PC Connectivity

Features:

• Sturdy
• Easy to use
• Fine finish
• Compatible with IEC 651 Type 2 ANSI 1.4 Type II
• 14 mm (.55") LCD Display with Back Light
• Parameters measured Lp (Sound Level) Leq (Equivalent continuous "A" Sound Level
• L max (Maximum sound level) LN (Percent of all readings over alarm value set
• Alarm set and alarm output
• Wide dynamic auto range with Auto/Manual power off function
• Can Memorize 30 groups of measurement/measurement reading
• AC/DC Auxiliary output
• RS 232 Interface for PC connectivity

Product Details:

Product Specification

Product Details:

Relying Upon Our Excellent Manufacturing Setup, Our Company is Manufacturing, Exporting and Supplying Highly Efficient Digital Karl Fischer Moisture Analyzer to the Clients. With the Interface Provided With Printers, These Titrators Have Microprocessor Based Circuitry. Widely Used in Pharmaceutical Chemical Industries for the Aqueous Our Non-aqeuous Titrations, These Titrators Are Available in Various Specifications as Per the Clients' Specific Needs. Besides, the Offered Digital Karl Fischer Moisture Analyzer Are Provided at Competitive Prices to the Clients.
 
Features:

• Combined Titrator for Potentiometric Karl Fischer Titrations for Accurate Moisture Estimation
• Supports Both Water and Dst Method for Factor Determination
• Results in Percentage, Ppm and Mg of H2o
• Drift Control: Automatic Drift Compensation
• Titration Modes: Potentiometric and, Karl Fischer
• Instrument Suitable for Potentiometric Titrations
• Suitable for Tan /tbn Titrations as Per Various Astm Methods
• Incorporated With Maintenance Free Metering Pump
• Valve Less Dispenser Suitable to Handle Various Titrants
• Titrant Can Be Changed Within No Time
• Cumbersome Piston Burette is Eliminated for Ease of Operation
• Several Titrations Can Be Carried Out Without the Need of Refilling the Titrant
• Eliminates the Need of Separate Dispenser for Different Titrants
• Single, Double and Multi Peak (Up to 10) Titration Facility
• Password Protection Facility Provided